ZETTLER Magnetics ACST current sensors used in Charging of Electric Vehicles

Application Spotlight January 2021

Munich, Germany January 27, 2021 – The use of precise, and often quite costly sensors, for the detection of the operating state in EV charging infrastructure, such as IC-CPD cables or wall boxes is not unusual. However, high levels of accuracy are not always required and therefore the use of high precision sensors may represent an unnecessary cost factor.

ACST-262-16With the sensors of the ACST series, ZETTLER MAGNETICS offers components that enable practically loss-free detection of alternating currents. The sensors of the type ACST-200 (AC Current Sense Transformer), which have been tried and tested in industrial automation for years, are used in control and monitoring applications, for protective circuits or load detection systems. They detect whether the intended current is actually flowing or whether the current strength deviates significantly due to an overload, a defect or a wiring fault. The main application is in 50 Hz or 60 Hz systems.

Since the primary winding is integrated in the sensor, this saves assembly time and results in a clearly defined, compact component with small external dimensions. Due to the galvanically isolated acquisition of the measurement signal, the sensor can be implemented at any point in the circuit.

ZETTLER sensors have also been used in chargers for vehicles in the e-mobility sector for years. A market leader of this industry approached ZETTLER in need of a sensor for their new generations of chargers. The engineers at ZETTLER MAGNETICS modified the existing sensor ACST262-14 in order to meet the required ablility to use it in applications up to 36 amps. The insulation values ​​required by the customer based on IEC 60664-1 with 6.5 mm clearance and 8.0 mm creepage distance could also be met with the new ACST262-16 sensor. The required area on the PCB for the component with the dimensions 20.5 mm x 17.5 mm remained unchanged compared to the ACST262-14. Only the height was changed by 2.0 mm and is therefore 22.0 mm.

For more information about similar applications and custom solutions, as well as about the comprehensive products from ZETTLER Magnetics please contact:

ZETTLER Electronics, Europe
Junkersstr. 3
82178 Puchheim
Germany
phone: +49(0)89-800 97 0
office@zettlerelectronics.com

About ZETTLER Magnetics Europe
ZETTLER Magnetics Europe, a ZETTLER Group division, provides application-engineering, sales, distribution and customer service in the EMEA region for a wide variety of top-quality transformers and magnetics components. We cater to a broad spectrum of customers in diverse industries and across many applications. ZETTLER Magnetics has the design and manufacturing capability to provide custom designs for the most specialized applications. Our sales, marketing, technical support, quality control and customer service departments work closely with our team of experienced design engineers at our manufacturing plant to help define the needs of our customers, and to provide optimal technical solutions for the most demanding application requirements. ZETTLER Magnetics engineering departments and manufacturing facilities, located in Xiamen, China, are fully vertically integrated and wholly owned. Read more at www.ZETTLERmagnetics.eu

Electronic components for 400 VAC applications (part 1/2)

Application Spotlight March 2020

Munich, Germany October 17., 2020 – The 400 VAC 3-phase grid is the most common power system found in industrial facilities, directly used to power electric motors or heavy loads such as resistive heating (boilers). Other applications are charging stations for hybrid and electric vehicles.

Higher voltages mean lower current and less copper (great for the heavy loads) but it also means greater spaces between conductors and harder to find components. In Part 1 of this application spotlight, we explore components from ZETTLER Magnetics used in the conversion of 400 VAC to lower voltages. For stepping down 400 VAC to lower AC voltages like 24 VAC commonly used in controls & automation, ZETTLER Magnetics offers a range of standard and custom linear 50/60Hz transformers including:

PCB mount transformers

Chassis mount Class 2 transformers

PCB-transformer Class2-chassistransformer

For conversion to low voltage DC, typically in the range of 5 to 24 VDC, ZETTLER Magnetics also offers:

Custom ferrite transformers

for those designing their own switch-mode power supplies

(Coming soon) AC-DC SMPS module

with an ultrawide 100-480VAC input

Ferritetransformer SMPS

For more information about similar applications and custom solutions, as well as about the comprehensive products from ZETTLER Magnetics please contact:

ZETTLER Electronics, Europe
Junkersstr. 3
82178 Puchheim
Germany
phone: +49(0)89-800 97 0
office@zettlerelectronics.com

About ZETTLER Magnetics Europe
ZETTLER Magnetics Europe, a ZETTLER Group division, provides application-engineering, sales, distribution and customer service in the EMEA region for a wide variety of top-quality transformers and magnetics components. We cater to a broad spectrum of customers in diverse industries and across many applications. ZETTLER Magnetics has the design and manufacturing capability to provide custom designs for the most specialized applications. Our sales, marketing, technical support, quality control and customer service departments work closely with our team of experienced design engineers at our manufacturing plant to help define the needs of our customers, and to provide optimal technical solutions for the most demanding application requirements. ZETTLER Magnetics engineering departments and manufacturing facilities, located in Xiamen, China, are fully vertically integrated and wholly owned. Read more at www.ZETTLERmagnetics.eu